Providing and fixing “Rajshri” brand factory made PVC Shelf of 22mm thickness consisting of Panel of Hollow PVC Profile of 12mm thickness consisting of M. S. frame made out of M.S. tubes of 19 gauge thickness and size of 12mm x 12mm inserted all around the hollow profile section and insert one 12mm x 12mm M.S. tube in the center of this section and lipped with 10mm (5mm x 2) thick and 12mm wide on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Plain PVC sheet using solvent cement on both the sides of the panel. The front side of the partition visible in the front of the cupboard to be edge bonded using 22mm wide x 5mm thick Plain/Printed/Prelam PVC sheet heat moulded in 450 on both the edges etc. complete as per direction of Engineer-in-charge, manufacturer’s specification and drawing. etc. complete as per direction of Engineer-in-charge.